# GMT Julia and ubuntu v18 **URL:** \ **Category:** GMT.jl Q&A\ **Created:** [January 26, 2021, 8:46pm UTC](https://forum.generic-mapping-tools.org/t/gmt-julia-and-ubuntu-v18/1270 "2021-01-26T20:46:05Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![charper](https://avatars.discourse-cdn.com/v4/letter/c/96bed5/32.png) [@charper](https://forum.generic-mapping-tools.org/u/charper)\ **Post date:** [January 26, 2021, 8:46pm UTC](https://forum.generic-mapping-tools.org/t/gmt-julia-and-ubuntu-v18/1270/1 "2021-01-26T20:46:06Z")
I am aware that installing GMT with Julia only adds the wrapper. I have downloaded GMT and followed the directions from its git repository: [https://github.com/GenericMappingTools/gmt/blob/master/INSTALL.md](https://github.com/GenericMappingTools/gmt/blob/master/INSTALL.md). GMT is installed and runs fine from my terminal. However whenever I try to use GMT in Julia I get the following message: ```auto You don't seem to have GMT installed and I don't install it automatically, so you will have to do it yourself. https://github.com/GenericMappingTools/gmt/blob/master/INSTALL.md#linux ``` This is a common problem where the solution is to show julia where my gmt library is. I did this by adding the following lines to my startup.jl: ```auto using Libdl push!(Libdl.DL_LOAD_PATH, "/usr/lib/x86_64-linux-gnu/libgmt.so.5") push!(Libdl.DL_LOAD_PATH, "/usr/lib/x86_64-linux-gnu/libgmt.so.5.4.3") ``` I added both paths because I was not sure which one was the correct library (running gmt --version says its version 5.4.3) However, when I load GMT I get the same message as before. Furthermore when I do `] test GMT` I get the following error: ```auto You don't seem to have GMT installed and I don't install it automatically, so you will have to do it yourself. https://github.com/GenericMappingTools/gmt/blob/master/INSTALL.md#linux 5.4.3 ERROR: LoadError: UndefVarError: GMT_Get_Version not defined Stacktrace: [1] getproperty(::Module, ::Symbol) at ./Base.jl:26 [2] top-level scope at /home/charper/.julia/packages/GMT/3tQ7w/test/runtests.jl:17 [3] include(::String) at ./client.jl:439 [4] top-level scope at none:6 in expression starting at /home/charper/.julia/packages/GMT/3tQ7w/test/runtests.jl:12 ERROR: Package GMT errored during testing ``` Here are the first 20 ish lines of runtest.jl ```auto using GMT using Test try run(`gmt --version`) # Will fail if GMT is not installed. global got_it = true catch @test 1 == 1 # Let tests pass for sake of not triggering a PkgEval failure global got_it = false end if (got_it) # Otherwise go straight to end const dbg2 = 3 # Either 2 or 3. 3 to test the used kwargs const dbg0 = 0 # With 0 prints only the non-consumed options. Set to -1 to ignore this Vd GMT.GMT_Get_Version(); ma=[0];mi=[0];pa=[0]; GMT.GMT_Get_Version(ma,mi,pa); API = GMT.GMT_Create_Session("GMT", 2, GMT.GMT_SESSION_NOEXIT + GMT.GMT_SESSION_EXTERNAL); GMT.GMT_Get_Ctrl(API); ``` Not sure what to do next, any help is appreciated! ---
**Author:** ![Joaquim](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.generic-mapping-tools.org/joaquim/32/16_2.png) [@Joaquim](https://forum.generic-mapping-tools.org/u/Joaquim)\ **Post date:** [January 26, 2021, 10:33pm UTC](https://forum.generic-mapping-tools.org/t/gmt-julia-and-ubuntu-v18/1270/2 "2021-01-26T22:33:48Z")
Hello @charper, I’m sorry that linux is making your life harder than it needs. But let’s start over. You should not need to set any `LOAD_PATH`, GMT.jl finds the GMT shared lib via system’s path. If running GMT from command line works, so should the GMT wrapper do. What does it print when you run in Julia REPL? ```auto readlines(`gmt --version`)[1] ``` and I hope that this “libgmt.so.5.4.3” does not mean GMT5. The GMT wrapper, since version 0.23, only works with GMT6 (when it works, a message informing this is issued). ```auto ``` ---
**Author:** ![charper](https://avatars.discourse-cdn.com/v4/letter/c/96bed5/32.png) [@charper](https://forum.generic-mapping-tools.org/u/charper)\ **Post date:** [January 26, 2021, 11:18pm UTC](https://forum.generic-mapping-tools.org/t/gmt-julia-and-ubuntu-v18/1270/3 "2021-01-26T23:18:44Z")
Hi Joaquim. Thanks for the reply! The Julia REPL returned a string with the version number “5.4.3”: ```auto julia> readlines(`gmt --version`)[1] "5.4.3" julia> ``` Following the Ubuntu instructions here ([https://github.com/GenericMappingTools/gmt/blob/master/INSTALL.md#linux](https://github.com/GenericMappingTools/gmt/blob/master/INSTALL.md#linux)) I installed GMT and its dependencies by running the following commands: ```auto sudo apt-get install gmt gmt-dcw gmt-gshhg # required sudo apt-get install ghostscript # optional sudo apt-get install gdal-bin graphicsmagick ffmpeg ``` It does mention that the Debian/Ubuntu official repositories might be slightly out of date…perhaps they are so out of date as to be running version 5? They do provide instructions for building from the source for the most up-to-date versions ([https://github.com/GenericMappingTools/gmt/blob/master/BUILDING.md](https://github.com/GenericMappingTools/gmt/blob/master/BUILDING.md)). This looked much more complicated, so I stuck to the standard install directions. At the time I thought that not being completely up-to-date was fine, but if you think the Ubuntu18.04 repositories are using a deprecated version, I can try to build from the source. However, if there are simpler things I could try first, that would be great. Although, I guess I should learn to build from the source eventually haha… ---
**Author:** ![Joaquim](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.generic-mapping-tools.org/joaquim/32/16_2.png) [@Joaquim](https://forum.generic-mapping-tools.org/u/Joaquim)\ **Post date:** [January 26, 2021, 11:59pm UTC](https://forum.generic-mapping-tools.org/t/gmt-julia-and-ubuntu-v18/1270/4 "2021-01-26T23:59:06Z")
Hmm, I still don’t get it why you got errors instead of the warning that GMT6 is needed. But shit, even the _10-years-old-versions-are-more-stable-Ubuntu_ should have GMT6. I’m almost sure that I already installed GMT6 from packages in Ubuntu. @seisman you know more? Anyway, GMT6 is indeed needed. Building from source is not so complicated as the (extensive) docs pages may indicate. It’s just a matter of installing the dependencies first and then the `Cmake` step. ---
**Author:** ![charper](https://avatars.discourse-cdn.com/v4/letter/c/96bed5/32.png) [@charper](https://forum.generic-mapping-tools.org/u/charper)\ **Post date:** [January 27, 2021, 2:23am UTC](https://forum.generic-mapping-tools.org/t/gmt-julia-and-ubuntu-v18/1270/5 "2021-01-27T02:23:29Z")
Ok so I went ahead and built from source. It was not as bad as I thought it would be! Now when I run `gmt --version` in terminal 6.1.1, is returned. However, I am still having the same issue with Julia. Could it be the install paths? my gmt is isntalled in usr/local/lib/ while I think julia might be installed in usr/home/…but if I include those explicit lines to the gmt path, should it matter? ---
**Author:** ![Joaquim](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.generic-mapping-tools.org/joaquim/32/16_2.png) [@Joaquim](https://forum.generic-mapping-tools.org/u/Joaquim)\ **Post date:** [January 27, 2021, 2:29am UTC](https://forum.generic-mapping-tools.org/t/gmt-julia-and-ubuntu-v18/1270/6 "2021-01-27T02:29:44Z")
> [@charper](#): > > ```auto > using Libdl > push!(Libdl.DL_LOAD_PATH, "/usr/lib/x86_64-linux-gnu/libgmt.so.5") > push!(Libdl.DL_LOAD_PATH, "/usr/lib/x86_64-linux-gnu/libgmt.so.5.4.3") > > ``` Do you still have this? Install path is irrelevant. Better to get rid of GMT5, you may be having issues with mixed versions. ---
**Author:** ![charper](https://avatars.discourse-cdn.com/v4/letter/c/96bed5/32.png) [@charper](https://forum.generic-mapping-tools.org/u/charper)\ **Post date:** [January 27, 2021, 3:13am UTC](https://forum.generic-mapping-tools.org/t/gmt-julia-and-ubuntu-v18/1270/7 "2021-01-27T03:13:32Z")
Good idea! I removed those lines from my startup.jl, unfortunately nothing changed. ---
**Author:** ![Joaquim](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.generic-mapping-tools.org/joaquim/32/16_2.png) [@Joaquim](https://forum.generic-mapping-tools.org/u/Joaquim)\ **Post date:** [January 27, 2021, 3:31am UTC](https://forum.generic-mapping-tools.org/t/gmt-julia-and-ubuntu-v18/1270/8 "2021-01-27T03:31:50Z")
> [@Joaquim](#): > > `readlines(`gmt --version`)[1]` Again, what does it says now? ```auto readlines(`gmt --version`)[1] ``` Must be some remainings of previous settings/installation. ---
**Author:** ![charper](https://avatars.discourse-cdn.com/v4/letter/c/96bed5/32.png) [@charper](https://forum.generic-mapping-tools.org/u/charper)\ **Post date:** [January 27, 2021, 4:17am UTC](https://forum.generic-mapping-tools.org/t/gmt-julia-and-ubuntu-v18/1270/9 "2021-01-27T04:17:51Z")
It returns the string “6.1.1” . Do you think the issue is with the fact that I have julia installed at `/home/charper/` and I have GMT installed at `/usr/local/lib`? ---
**Author:** ![seisman](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.generic-mapping-tools.org/seisman/32/4_2.png) [@seisman](https://forum.generic-mapping-tools.org/u/seisman)\ **Post date:** [January 27, 2021, 4:34am UTC](https://forum.generic-mapping-tools.org/t/gmt-julia-and-ubuntu-v18/1270/10 "2021-01-27T04:34:55Z")
> [@Joaquim](#): > > Hmm, I still don’t get it why you got errors instead of the warning that GMT6 is needed. But shit, even the _10-years-old-versions-are-more-stable-Ubuntu_ should have GMT6. I’m almost sure that I already installed GMT6 from packages in Ubuntu. @seisman you know more? Here are the GMT versions that Ubuntu provide: - Ubuntu 18.04 =\> GMT 5.4.3 - Ubuntu 20.04 =\> GMT 6.0.0 - Ubuntu 20.10 =\> GMT 6.1.0 ---
**Author:** ![charper](https://avatars.discourse-cdn.com/v4/letter/c/96bed5/32.png) [@charper](https://forum.generic-mapping-tools.org/u/charper)\ **Post date:** [January 27, 2021, 4:46am UTC](https://forum.generic-mapping-tools.org/t/gmt-julia-and-ubuntu-v18/1270/11 "2021-01-27T04:46:27Z")
Thanks seisman! I managed to get GMT6.1.1 running on 18.04 by doing a build from the source material. ---
**Author:** ![Joaquim](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.generic-mapping-tools.org/joaquim/32/16_2.png) [@Joaquim](https://forum.generic-mapping-tools.org/u/Joaquim)\ **Post date:** [January 27, 2021, 2:45pm UTC](https://forum.generic-mapping-tools.org/t/gmt-julia-and-ubuntu-v18/1270/12 "2021-01-27T14:45:25Z")
Hmm, what might be happening is this. In your first attempt it pre-compiled GMT.jl and now, since nothing has changed in the code to trigger another pre-compilation Julia is using the faulty one. Go to `/home/charper/.juliacompiled/v1.5/GMT` and delete the file(s) there. ---
**Author:** ![charper](https://avatars.discourse-cdn.com/v4/letter/c/96bed5/32.png) [@charper](https://forum.generic-mapping-tools.org/u/charper)\ **Post date:** [January 27, 2021, 7:53pm UTC](https://forum.generic-mapping-tools.org/t/gmt-julia-and-ubuntu-v18/1270/13 "2021-01-27T19:53:33Z")
That worked. Thank you so much! In summary, using the ubuntu 18 repositories defaults to version 5, which I guess was causing the problem. Upgrading to version 6 by installing from the source, and then forcing Julia to do another pre-compilation fixed everything. ---
**Author:** ![Joaquim](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.generic-mapping-tools.org/joaquim/32/16_2.png) [@Joaquim](https://forum.generic-mapping-tools.org/u/Joaquim)\ **Post date:** [January 27, 2021, 11:35pm UTC](https://forum.generic-mapping-tools.org/t/gmt-julia-and-ubuntu-v18/1270/14 "2021-01-27T23:35:01Z")
Good that you finally got it to work. It should have shown you this warning. But the problem is if one only update GMT and not GMT.jl the old precompiled version will keep saying the same though that’s no longer true. ```auto julia> cd("c:/v"); @time using GMT [Info: Precompiling GMT [5752ebe1-31b9-557e-87aa-f909b540aa54] GMT version 5 is no longer supported (support ended at 0.23). 18.142623 seconds (2.03 M allocations: 125.454 MiB, 0.23% gc time, 1.63% compilation time) ```